Supplying the World's leading brands of commercial kitchen equipment to the Australian Hospitality Industry
Supplying the World's leading brands of commercial kitchen equipment to the Australian Hospitality Industry
STAINLESS STEEL TROLLEYS
Food Equipment Group Trolleys are manufactured to the highest standards ensuring years of operation. We focus on durability, hygiene and OH&S making sure that they are easy and safe for staff to use.
We have manufactured trolleys for some of the World’s largest convention operators (both within Australia and overseas), Hospitals, Hotels, restaurants, production facilities and Health care operations.
Food Equipment Group trolleys are:
​
-
Made from AS304 food grade Stainless Steel
-
Clean, hygienic design
-
Robust, durable construction
-
High strength frames
-
Fully welded construction
-
All welds hygienically polished
-
Non-marking tyres (generally two fixed, two swivel and lockable, depending on trolley and application)
-
Gusseted handles for extra strength (where applicable)
-
Hat section deck supports for added durability (where applicable)
-
Roller bumpers to prevent building damage (where applicable)
-
Wet edges to prevent spillage and items falling off (where applicable)
​
​
TLY01
FLATBED STAINLESS STEEL TROLLEY
-
Base 1,500mm x 650mm (h)
-
Gusset from handle to base for additional strength. Handle 32mm tube.
-
200mm castors—2ea braked, swivel to handle end, 2ea fixed. Roller bumpers on each corner. Hat section below deck for additional strength.
TLY05
QUEEN MARY 5 TIER STAINLESS STEEL TROLLEY
-
1,560mm x 680 x 1,700 (h)
-
5 decks all with hat sections for additional rigidity. All decks with wet edge. Stainless steel handles to each end.
-
Two swivel castors, 2ea fixed and braked. Roller bumpers on each corner.
TLY07
COFFEE BREWING STAINLESS STEEL TROLLEY
-
500 x 700 (h)
-
To slide up to side of Felco Lexus low bench.
-
4ea 200mm castors, all swivel, 2ea braked.
TLY10
HEATED PLATE STAINLESS STEEL TROLLEY
-
To hold 4ea stacks of 40ea plates (total 160 plates).
-
750mm x 732mm Heated with element and fan forced.
-
Central S/S perforated column for even heat distribution. 2ea flap lids with handle.
-
2ea front opening doors, control panel below door.
-
Double skinned.
-
4ea 200mm castors, 2ea swivel, 2ea fixed, 2ea braked.
-
Supplied with plug and flex.
TLY13
2/1 GN TRANSPORTATION TROLLEY 3 TIER STAINLESS STEEL
-
700mm x 580mm x 900mm (h)
-
Wet edge to top only to take 2/1 GN Pans.
-
4ea 200mm castors, all swivel, 2ea braked.
-
Roller bumpers on each corner.
TLY15
DRIPPING TROLLEY STAINLESS STEEL
-
1,200mm x 600 x 1,500 (h)
-
4 Tier, S/S tubular shelves to facilitate draining of water, 32mm S/S tube frame.
-
200mm castors, all swivel, 2ea braked.
-
Roller bumpers on each corner.
TLY04
MOBILE STAINLESS STEEL KITCHEN BENCH
-
Deck 2000 x 800 x 900 (h)
-
Leg brace profile to accommodate heated plate trolleys under—300mm above floor.
-
Four swivel castors, all braked.
TLY06
DROP SIDE STAINLESS STEEL TROLLEY 4WD
-
1,160mm x 610 x 1,230 (h)
-
Hat section under shelves for strength.
-
Lip top and bottom shelf—500mm, both longer sides of the lip fold down.
-
250mm pneumatic tyres—2ea fixed, 2ea swivel and braked.
TLY08
TROLLEY 2/1 GN STAINLESS STEEL TROLLEY
-
620mm x 700 x 1,800 (h)
-
12ea runners @ 1200mm spacing
-
S/S solid base, 2ea handles to front.
-
4ea 200mm castors, all swivel, 2ea braked.
-
Roller bumpers on each corner.
-
Fully welded.
-
Vertical rod welded to rear to stop pans falling out during transport.
-
Mid-mounted cross brace to front and rear for additional strength.
TLY11
TWO (2) TIER STAINLESS STEEL TROLLEY
-
1,100mm x 570mm x 900mm (h) (not including handles)
-
Wet edge to both shelves with hat section under.
-
4ea 200mm castors, 2ea swivel, 2ea fixed and braked.
-
Roller bumpers on each corner.
TLY14
DISHWASHER BASKET STAINLESS STEEL TROLLEY
-
To take 500mm x 500mm dishwasher racks.
-
Base ‘creased’ for additional strength.
-
200mm castors, all swivel, 2ea braked.
-
Roller bumpers on each corner.
-
Central drain.
